Water Soaker "Go Soak It!"
Float Dock® strainer
8" all aluminum Float Dock® strainer

Water Eductor
Carry Rack
Low-Flow strainer
The Water Shark
Power Jet Siphon
In-Line Power Jet Siphon
Clapper Valve





Go Soak It! Fire-Buster- Professional System and Home Owner System  is the most effective new product for creating water doused fire lines to protect homes and other structures and property from wildfires and controlled burns: more effective and cheaper than outdoor sprinklers or fire retardants. Go Soak It! first product to SUPERSIZE CONCEPT BEHIND A STANDARD GARDEN SOAKER/SPRINKLER HOSE. A Go Soak It! Fire-Buster-System test (re: videos below) was conducted on April 16 in Janesville, WI in association with the Turtle, Wisconsin Fire Dept. A practice burn of an old farmhouse was conducted with the Go Soak It! hose protecting the new home adjacent the burning farmhouse. The owner of the new home, Alvin Revels, commented on the burn: "Dean's Giant Soaker Hose did a great job of protecting my new home from the fire. There was no damage to my home." Go Soak It! creates a watered fire line via holes in the 600 foot Go Soak It! hose, reducing the spread of fires advancing on structures including homes. Requires up to 425 gpm water source; FOL DA TANK, pool, pond, reservoir, lake, stream, river or well. Powered by a gas pump or hooked to a hydrant or fire truck, Go Soak It! is independent of electrical power sources. Go Soak It! emits up to 25,000 gal. of water/hr.: equivalent to 2.5 water bomber loads. Free tech support. Invented by former Canadian Forest Firefighter Dean Landers. You Tube:, ?

Go Soak It! Fire-Buster Professional System includes: 600 feet of Go Soak It! Fire-Buster-Hose in six 100 ft lengths (60 lbs each) with fittings of your choice, 9HP Northstar Self Priming Water Pump with Honda GX 270 engine, 20 ft suction hose & strainer. Free tech support.

Go Soak It! Fire-Buster Home Owner System includes: 200 feet of Go Soak It! Fire-Buster-Hose in two 100 ft lengths (60 lbs each) with fittings of your choice, 9HP Duromax Water Pump, 20 ft suction hose & strainer. Free tech support.



The "Original" Floating Strainer
Float Dock® Strainer

FOL-DA-TANK® Company manufactured the first floating strainer in 1954 and started selling them in 1955. 
The Float-Dock® proved to be the most practical answer not only for firefighting but also for construction and minning operations.

Pump pond water free of debris with Float Dock® floating strainer


The Float Dock® strainer is a valuable piece of equipment that can save the day in many firefighting situations. Float Dock® lets you use the water in farm ponds or streams, both shallow and deep, and with a Fol-Da-Tank.  Because it operates below scum and debris and above sand and muck, it screens out the materials that wear out impellers, packing and bearings. Since Float Dock® strainers are self-leveling, there are no whirlpools or suction loss.  Each unit is fully guaranteed.  (NFPA 1142 Compliant)


Construction Features:

  • Professionally designed & engineered for maximum pumping capacity
  • Polyethelene molded float with molded in carry handle (handle can be used for tie off and retrevel)
  • No need for a vortex plate.  The float prevents any whirlpooling.
  • Self-Leveling
  • Not hand welded
  • Al-Mag castings  - Proven to be the toughest in the industry
  • Long handle swivels with standard NH or NPSH threads
  • 20-30% more open area at the intake
  • Other threads available
  • Detach strainer and use separately as a "Box Strainer"
  • All Float Dock® are available in all aluminum construction up to 8" (See Below)
  • Float Dock® drafts in as little as 5 inches (13) cm of water
  • Optional riser will convert the strainer box into a low-level strainer



In deep water, Float Dock® drafts clean water below the surface.
In less than 30 seconds, strainer can be removed for use in cisterns.

Float Dock® in use in cold climate.

Part No. FDSF

Part No. FDSB

Part No.
Float Only
Strainer Only
Ship Wts.
2 1/2" /
5" x 15" x 18.5"
13 x 38 x 47cm
4" x 6" x 14"
10 x 15 x 36cm
16 lbs. / 7 kg
3" / 8 cm
5" x 15" x 18.5"
13 x 38 x 47cm
4" x 6" x 14"
10 x 15 x 36cm
16 lbs. / 7 kg
4" / 10cm
7" x 21" x 26.5"
18 x 53 x 67cm
7" x 10" x 18.5"
18 x 25 x 47cm
32 lbs. / 15 kg
4 1/2" /
11 cm
7" x 21.5" x 26.5"
18 x 55 x 67cm
6" x 8" x 18.5"
15 x 20 x 47cm
32 lbs. / 15 kg
5" / 13cm
7" x 21.5" x 26.5"
18 x 55 x 67cm
6" x 8" x 18.5"
15 x 20 x 47cm
32 lbs. / 15 kg
6" / 15cm
7" x 21.5" x 26.5"
18 x 55 x 67cm
7" x 16" x 18.5"
18 x 41 x 47cm
32 lbs. / 15 kg

Large Float Dock Strainer® 4"- 6"

Spec Drawing

Shown is upside down position.



Riser for Floating Strainer Sizes 4" to 6"
Ideal for use in Fol-Da-Tank


Sits on tank bottom without damage to the liner.  Made from lightweight Aluminum.

2.5" Float Dock® Strainer shown with riser.


Schematic Float Dock Strainer® with riser in stream.

Riser Kit

Easy add on kit comes with:

  • 4 - 5/16" bolts
  • 4 - spacers
  • 1 - riser plate

4 tabs on the strainer barrel are pre-drilled.  All you have to do is the easy assembly. 
When ordering a Riser with the Float-Dock® at the same time, it will come already assembled.



8" Float Dock® Strainer
All aluminum construction.

8" Float Dock® Strainer shown with 8" female cam (not painted)


Side view with float pivoting.  Underside showing filter screen.

Painted with high vis. yellow

10" & 12" available. Call for pricing




The New Floating Water Eductor by Fol-Da-Tank is the economical solution to siphoning water from previously inaccessible water sources.  The cast aluminum structure is rugged yet light weight.  The purpose built optional float dock eliminates the need for buoys and ensures the screen will remain below the surface of the water and away from mud, rocks and debris.  Call for pricing.  Floating Water Eductor PDF Flyer





Carry Rack




Carry rack parts Carry rack with float dock strainer



Accessory for Strainers Part Number
Lightweight carrying rack can be mounted on a running board or inside a compartment. There are two sizes. Small is for 2.5", and 3" Float Dock® strainers and all Low-Flow strainers. Large is for 4", 4.5", 5", and 6" Float Dock® strainers. FDSCR-Small










Aluminum Low-Flow "TM" Strainer


 Low Flow™ Low- Level strainer on right shown with jet booster.


Construction Features:

  • Professionally designed & engineered for maximum pumping capacity
  • Al-Mag castings - proven to be the toughest in the industry!
  • The Low-Flow™ Low-Level will perform at maximum pumping capacity down to a water level of 1.5" - 2" depending on your set up area.
  • Flow Rate - Tested with 6" Low-Flow™ Low-Level rate is 1700 - 2000 GPM.  The flow rates may vary due to the design of the pumper and the set up area of your pumper and Fol-Da-Tank.
  • Use of a male and female SST flange mounted on the side wall of your Fol-Da-Tank will eliminate the lifting factor when pumping from the side of the tank.
  • Long handle swivels with standard NH or NPSH threads
  • Surface turbulence will not affect this strainer
  • Optional 1.5" Water Transfer Device - available on sizes 4" to 6"
  • The Low-Flow™ Low-Level is easily stored in truck compartments and can be preattached to hard suction hose
    (NFPA 1142 Compliant)
Part No.
Inches / cm
Ship Wts.
LFS2.5 2.5" / 6cm 10" x 10" x 8.5"
25 x 25 x 22cm
13 lbs. / 6 kg
LFS3 3" / 8cm 10" x 10" x 8.5"
25 x 25 x 22cm
13 lbs. / 6 kg
LFS4 4" / 10cm 16" x 13" x 12"
41 x 33 x 31cm
22 lbs. / 10 kg
LFS4.5 4.5" / 11cm 16" x 13" x 12"
41 x 33 x 31cm
23 lbs. / 10 kg
LFS5 5" / 13cm 16" x 13" x 12"
41 x 33 x 31cm
23 lbs. / 10 kg
LFS6 6" / 15cm 16" x 13" x 12"
41 x 33 x 31cm
24 lbs. / 11 kg


Aluminum Low-Flow "TM" Strainer 4" - 6"
Spec Drawings


  *Part number shown for housing with National Standard Threads (NST).  Other Housing available.*Dimensions are measured with nozzle in lowered position.

Patent Pending 

Side Wall Low Level Strainer




Side wall strainer for "thru the wall" dump tank use.  The Side Wall Strainer, the "Water Shark", eliminates serveral problems currently known with existing Low Level Strainers.  The Water Shark increases the overall efficiency and flow of the system while providing free access around the outside of the dump tank.  Call for pricing.

Design Features:

  • Light weight powder coated Aluminum.
  • Quick set-up, attaches in seconds using a custom design Cam Lever clamp band.
  • Large 46" x 2 1/2" wide intake area provides a 4.4:1 strained intake ration.
  • Guide veins inside create 5 seperate intake zones.
  • Large 8" check valve provides 100% flow for 6" suction and holds water in the hose during change over.
  • Eliminates trapped air pockets noticable on current up and over hose designs.
  • "U-shape" intake provides inlet of water on three sides (front, bottom and back).
  • Custom molded feet protect the liner from puncture and suspend the strainer 1/2" from the bottom of the liner.
  • Side attachment eliminates jet wash issues.  Also, allows easy walk access around the dump tank.
  • Can be retrofitted to existing dump tanks in the field.  Mounts to either Aluminum square frame or round steel frame.




Power Jet Siphon


The Power Jet Siphon is designed for use with two or more Fol-Da-Tanks. The siphon connects to a hard suction hose and assists the transfer of water from one tank to another.  This keeps the main tank full of water for drafting as the secondary tank is refilled.  The construction features include: durable al-mag alloy, aircraft quality tubing and 1 1/2” female assist by 4” - 6” discharge couplings.  Standard threads are NST with other threads available.  Storz and cam fittings are available upon request.  (NFPA 1142 compliant)





Clapper Valve




6" attached to 6" low level strainer

6" with 6" low level strainer


This valve is specifically designed to maintain the prime between a pumper and a low level or floating strainer.  When pumping through this valve GPM's will not be lowered.

Construction Features:

  • 6061T6 aluminum tubing
  • Al-Mag castings - Proven to be the toughest in the industry!

Available Sizes:


Special threads, cam lock & storz connections available.



1275 W. 11th Street - P.O. Box 110 Milan, IL 61264
1-800-637-8265 or 309-787-3500 Fax: 309-787-3635

© Fol-Da-Tank. All rights reserved.
Created by Twin State Web Design